The STEELMAN 1620 3/4-Inch (20mm) Belt Sander is an ideal tool for auto repair work, weld prep and cleanup, sharp edge grinding and removal, and more. With a maximum free run speed of 16,000 RPM this pneumatic tool uses a 3/4-inch x 20.5-inch (20mm x 520mm) 120 grit belt to will help you get the job done right and done fast. With a 360-degree rotatable head and narrow sanding profile you can easily work in areas other pneumatic sanders can't access. The built-in regulator allows for constistant performance and the tool operates on 18.4 cubic feet per minute of 90 PSI compressed air. Exhaust is redirected back out through the handle away from your work area. Threaded to accept a conventional 1/4-inch NPT air inlet to connect it to a 3/8-inch air hose this tool is 18.5-inches long overall and weighs 3.65 lb. Includes one 120 grit sanding belt.
- MULTI-USE - 3/4 x 20.5-inch (20 x 520mm) sanding belt is Ideal for smoothing rough or sharp edges, welds, and bodywork
- ACCESS NARROW SPACES - Narrow sanding profile lets you easily work in small and confined areas
- 360 DEGREE ROTATION - Head and sanding belt can be rotated 360 degrees to easily reach into awkward areas
- BUILT-IN REGULATOR - Built-in pneumatic regulator evens out pressure spikes and provides consistent pressure
- REDIRECTED EXHAUST - Exhaust air is redirected back through the handle and away from the work area
- 16,000 RPM - Max free running speed of 16,000 RPM using 18.4 CFM of compressed air